Week 8: 5/19/15 Adding Case

Week 8

5/19/15

A tin was obtained by Alexander on 5/17/15

The USB port was soldered on PC board and a metal case was decided to be used holding circuit can cell phone. The circuit was attached to the cover of the case using screws as pictures showing below: 

Figure 1: Case Cover with Circuit 

Figure 2: Top View

Figure 3: Side View

As Figure 1 shows that the PC board was elevated by screws to ensure it was insulated from the metal case and as Figure 3 shows that it was fixed in place by nuts. A hole was left for wires that will connect the circuit and alternator. 

The case was decided to be placed on the lower frame of the bike. Holes were drilled on the bottom of the case.